Vector sine wave programmable controller for electric motor with Hall sensor. The most popular brand Fardriver, model 721200.
The set includes an additional radiator for air cooling.
The price of the goods includes consultation on connection and programming assistance and 12 month warranty.
One of the best programmable brushless motor controllers on the market.
The sinus signal allows you to achieve very precise motor control, no noise, the highest possible efficiency and torque, the possibility of a smooth start from a standstill.
It is possible to change many settings over a very wide range using a PC or phone on IOS and Android via Bluetooth, namely:
- Separately set the phase and battery current in any proportions.
- Limit the minimum and maximum battery voltage (from 36 up to 90V) in order to protect it.
- Adjust the smoothness of the start and the strength of regenerative braking in any range.
- Adjust the current supply within a wide range at a certain position of the accelerator handle.
- Regulate the voltage of the accelerator handle, which makes it possible to obtain protection from an independent start from a place in case of damage (short circuit of the Hall sensor contacts) of the accelerator handle.
- Adjust the temperature at which the power will be limited, and then the controller and the engine will turn off (there must be a temperature sensor installed in the engine).
- Configure 5 additional buttons that are activated when connected to 12V. For example, cruise control, reverse, brake sensors, parking mode, acceleration switch (Boost).
Peculiarities:
- The ability to connect any display / speedometer, as it has an output setting (analogue, and many types of digital).
- Support for motors with any number of poles.
- Operating temperature range: -40 to 80℃ (MOSFET temperature).
- Phase current: 1200A
- Battery current: 600A
- Continuous power: 20 kW
- Peak power: 45 kW.
- Suitable for: electric motors with a rated power 8kW-12kW.
Bluetooth or programming cable is sold separately.
